At 02:19 PM 7/13/02 -0400, you wrote:
>Correct me if I'm wrong...but the lower the grit, the coarser the paper...
>so therefore you would have more sand scratches on the surface if you used
>400 grit than you would if you used a paper of higher grit, say about 600
>grit(smaller sanding particles)....so 600 would be smoother than 400
>grit...Correct? That is why you use 2,000 grit to wet sand the final clear
>before you do any buffing...
Thanks again. Have saved you posts for future reference rather than
depend on my memory.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:04 EDT