Fluctuating idle, doesn't come down to idle quick enough, idles higher
than normal....but .78v shouldn't cause that.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of
Dakotabean@aol.com
Sent: Saturday, July 13, 2002 5:07 PM
To: dakota-truck@dakota-truck.net
Subject: DML: TPS voltage
I checked my TPS voltage before doing the voltage mod and the scanner
read it
at .7 volts and my ohm meter read it at .78 volts (maybe the scanner
just
doesn't read tenths).
What would be the effects of a TPS adjusted over .7 v.? Thanks, James
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:04 EDT