Steve,
We make 66mm 68mm and 70mm sets for the Viper. They will be avialable in
about 3 weeks... Its either the 68 or 70mm pair for 750hp!
Bruce
----- Original Message -----
From: "Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, July 16, 2002 12:05 PM
Subject: DML: - BRUCE Question on the Viper TB units.
>
> Now that is a serious TB unit, Bruce.
>
> Are making the Viper's TB units? I will need two of them next spring. I
> already can see a 750HP motor for the street scene.
>
> --------------------------------------
> Steven St.Laurent
> C4i System Engineer
> C4i Engineering Branch, PSD, MCTSSA
> MARCORSYSCOM, U.S. Marine Corps
> Office (760) 725-2506 (DSN Prefix: 365)
> "Never be content with somebody else definition
> of you. Instead, define yourself by your own beliefs,
> your own truths, your own understanding of who
> you are. Never be content until you are happy with
> the unique person GOD has created you to be."
>
> -----Original Message-----
> From: BKBridges [mailto:bbridges@flometrics.com]
> Sent: Tuesday, July 16, 2002 10:14 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: F&B Flow numbers (re: 280hp 4.7)
>
>
> I can do that!
> The 68mm flows about 725CFM @ 25"
> The 70mm flows about 810 CFM @ 25"
> The 72mm Flows about 910CFM @ 25"
> (Stock 65mm flows about 600 CFM @ 25", ported stock 68mm flows about
700CFM
> @25")
> Bruce
> ----- Original Message -----
> From: "Barret, Matt" <MATT_BARRET@earthtech.com>
> To: "DML (E-mail)" <dakota-truck@dakota-truck.net>
> Sent: Tuesday, July 16, 2002 9:37 AM
> Subject: RE: DML: New 4.7L dyno numbers, 280 hp
>
>
> >
> > Steve, other than the obvious, I don't know what the flow difference is.
> > Matter of fact I never did find out what any of F&B's TB's flow. That
info
> > was never released as far as I know.
> > If someone does have those numbers, I'd love to see them!
> >
> >
> > Matt Y2K-HEMI
> > '00 RC 4.7L 5 spd
> > 14.23 @ 94.49 (before recent mods)
> >
> >
> >
> > <Date: Tue, 16 Jul 2002 06:21:27 -0700
> > <From: Stlaurent Mr Steven <STLAURENTS@MCTSSA.USMC.MIL>
> > <Subject: RE: DML: New 4.7L dyno numbers, 280 hp
> >
> > <Matt what is the difference from the 68mm to the 72mm version of F&B TB
> > <unit?
> >
> > - --------------------------------------
> > <Steven St.Laurent
> > <C4i System Engineer
> > <C4i Engineering Branch, PSD, MCTSSA
> > <MARCORSYSCOM, U.S. Marine Corps
> > <Office (760) 725-2506 (DSN Prefix: 365)
> > <"Never be content with somebody else definition
> > <of you. Instead, define yourself by your own beliefs,
> > <your own truths, your own understanding of who
> > <you are. Never be content until you are happy with
> > <the unique person GOD has created you to be."
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:04 EDT