Re: need oem connector for ignition coil

From: Doug Myers (doug.myers2@verizon.net)
Date: Wed Jul 17 2002 - 08:20:02 EDT


    Why not just get the Accel adapter harness, #140021AH? Just cut the grey
connector off the end( you can't use it anyways), and what's left gives you
the connector you need and about 3" of heavy gauge wire to splice it on, and
its NEW. Price is in the $20-$25 range.

Doug Myers
-------------
'99 Dakota RC/SB 5.9L/5-speed/3.92SG - 14.320@98.46mph
'70 Barracuda Gran Coupe 383/auto - work in progress

<Pukeloser@aol.com> wrote in message news:195.9c6faf3.2a65b664@aol.com...
>
> Hey all,
>
> I just got a new coil for the dak (1995 5.2) but MSD now makes one that
> uses the stock connector for the wires, unfortunately I had replaced the
coil
> with an MSD coil back when they didnt do that so I dont have the male
> connector for the wires. The dealer said I'd have to buy the whole wiring
> harness. Does anyone have an extra laying around that I could buy? or live
> near a junkyard that'll let you cut one off? I'd be glad to pay for it.
>
> John S



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:05 EDT