The front wheel bearings on the GenIII Daks are Non serviceable. These are
in the hub assembly, good for 100,000 miles. According to the dealer and
manual.
----- Original Message -----
From: Mallett, Donald B <Donald.Mallett@BNSF.com>
To: 'DML' <dakota-truck@dakota-truck.net>
Sent: Sunday, July 21, 2002 1:48 AM
Subject: DML: Inspect front wheel bearings
>
> "Inspect front wheel bearings. Clean and repack if required" That's what
the
> owner's manual say to do at so many miles. OK fine, I'll try any thing
once.
> I guess I'll need to remove the rotors and calipers. Then what?
>
> What I'm I looking for either bad or good, What special tools or grease
will
> I need? This is new ground for me :-O
>
>
> *-------------------------------Y2KOTA-------------------------------*
> Don Mallett
> Y2K QC 4.7L Auto SLT+
> http://Geocities.com/maldbnsf/
> http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm
> *---------------------Thank GOD, I'm a DML Boy!!!---------------------*
>
>
> P.S. HAPPY SUNDAY EVERYONE!!!!!!! :-p
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:05 EDT