Sure can. I've got a jewelers drill bit set (ultra-small bits - turn by
hand). In the mean time, set the nozzle AFTER the discharge opening
from the S/C. DO NOT put the nitrous before it!! (I had mine in the
discharge tube after the bypass valve and about 2" in front of the TB
opening.
Oh god...i've created a monster!! ;) LOL
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of scsilverdak
Sent: Monday, July 29, 2002 7:09 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Hey Bernd ! What Size Bottle ?
My sneeky pete kit should be at work by tomorrow, I have sold the SUPER
POWER SHOT PLATE and jets I had along with the extra fuel solenoid to a
local circle track racer, he also wants the 10oz bottle from the sneeky
pete kit, 3 quess's what he plans to do with it!!!! Bernd.......I f I
send the jets from the sneeky pete down can you drill them using a pin
vise? and the special bits they require? my drill bit's are marked for
inches and I have none small enough to get it it right. And I am not
sure how much they need to be enlarged to. By the time I sold off my old
N.O.S. PARTS I had enough to pay for the kit, the sneeky pete will cost
me about $10.00 out of pocket!!! The POLISHED #10 bottle will cost about
$280.00, and the brackets about $40.00.I should have less than $350.00
bucks in the whole set up. Oh' what size supply line should I run from
the bottle to the solenoid?
Ron- '01 Dakota Sport 3.9 Supercharged
website: www.scsilverdak.com
e-mail: scsilverdak@hotmail.com
----- Original Message -----
From: "Tom Slick North" <prodog@swbell.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, July 27, 2002 7:56 PM
Subject: Re: DML: Hey Bernd ! What Size Bottle ?
>
> Oh man, it was so much fun..... R/T-2 rocks...even at only 6psi
> boost(intercooled!)
>
> Later!
> Tom "Slick"
>
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, July 27, 2002 7:22 PM
> Subject: RE: DML: Hey Bernd ! What Size Bottle ?
>
>
> >
> > Hey Ron...
> >
> > R/T-2 took out a Lightning today (on a test run and only running
> > 6psi at the time)! ;)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@dakota-truck.net
> > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of
> > scsilverdak
> > Sent: Saturday, July 27, 2002 10:13 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: Hey Bernd ! What Size Bottle ?
> >
> >
> >
> > COOL,............I'll be in touch soon after your vacation is over
> > to inquire about the injectors........HEHEHEHE.....
> > HAHAHAHAHA.............. By the way have you had a chance to look
> > over the dyno sheets and A/F ratio printouts?
> >
> > Ron- '01 Dakota Sport 3.9 Supercharged
> > website: www.scsilverdak.com
> > e-mail: scsilverdak@hotmail.com
> > ----- Original Message -----
> > From: "Bernd D. Ratsch" <bernd@texas.net>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Saturday, July 27, 2002 11:29 AM
> > Subject: RE: DML: Hey Bernd ! What Size Bottle ?
> >
> >
> > >
> > > Should be 20, 22, 24, and 26 (sometimes they pack a 28 in there as
> > > well). Use the 26 or 28.
> > >
> > > - Bernd
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@dakota-truck.net
> > > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of
> > > scsilverdak
> > > Sent: Saturday, July 27, 2002 8:02 AM
> > > To: dakota-truck@dakota-truck.net
> > > Subject: Re: DML: Hey Bernd ! What Size Bottle ?
> > >
> > >
> > >
> > > OK, I'll make due with jets it comes with! how many jets are in
> > > the kit? And what sizes?
> > > Ron- '01 Dakota Sport 3.9 Supercharged
> > > website: www.scsilverdak.com
> > > e-mail: scsilverdak@hotmail.com
> > > ----- Original Message -----
> > > From: "Bernd D. Ratsch" <bernd@texas.net>
> > > To: <dakota-truck@dakota-truck.net>
> > > Sent: Saturday, July 27, 2002 10:15 AM
> > > Subject: RE: DML: Hey Bernd ! What Size Bottle ?
> > >
> > >
> > > >
> > > > The Sneeky-Pete jets are totally different...won't work.
> > > >
> > > > - Bernd
> > > >
> > > > -----Original Message-----
> > > > From: owner-dakota-truck@dakota-truck.net
> > > > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of
> > > > scsilverdak
> > > > Sent: Saturday, July 27, 2002 5:08 AM
> > > > To: dakota-truck@dakota-truck.net
> > > > Subject: Re: DML: Hey Bernd ! What Size Bottle ?
> > > >
> > > >
> > > >
> > > > Thanks Bernd, I'll purchase a polished 10# unit and the Billet
> > > > mounting brackets which will be mounted in the bed on the
> > > > passenger side just forward of the wheel wheel. I happen to have
> > > > an assortment
> >
> > > > of the brass flare jets from a SUPER POWERSHOT KIT, later on
> > > > maybe I'll be able use those after the six can be setup to use
> > > > it.
> > > >
> > > > Ron- '01 Dakota Sport 3.9 Supercharged
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
>
> -
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:07 EDT