At 05:27 PM 7/31/02 -0600, you wrote:
>I'm still working on this issue as well. I've got the same problem and
>can't figure out what it is...and it's not the cam either. (Stock/old
>motor did the same thing...so does the new one - and it's got all new
>sensors as well.) - Bernd
Jay and Bernd
A long shot in the dark. Check the fuel pump relay in the power
distribution center. The pcm energizes the fuel pump through
this relay. See if the relay terminals are okay and if the PDC
connector terminals are damaged or corroded. It might be
that there's a faulty/loose connection under cold conditions but
okay when conditions are heated up.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:08 EDT