A lot of relays in the distribution box have exactly the same numbers on
them. So would it hurt if I tried switching a few around and see if that
makes a difference?
TIA
~Jay
> Jay and Bernd
>
> A long shot in the dark. Check the fuel pump relay in the power
> distribution center. The pcm energizes the fuel pump through
> this relay. See if the relay terminals are okay and if the PDC
> connector terminals are damaged or corroded. It might be
> that there's a faulty/loose connection under cold conditions but
> okay when conditions are heated up.
>
> Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:11 EDT