Hey Bernd,
I'll see if anyone around here has one I can check. I have a friend here at
work with a '99, but it has a different connector. Don't know why, but it
does. Guess its just my luck.
Rich
-----Original Message-----
From: Bernd D. Ratsch [mailto:bernd@texas.net]
Sent: Monday, August 12, 2002 10:43 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: MAP Connector Part Numbers
Rich,
'96 is OBD-II and the older style use a slightly different connector.
'96-'02 are the same though.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Wisotzkey,
Rich
Sent: Monday, August 12, 2002 7:27 AM
To: 'dakota-truck@dakota-truck.net'
Subject: DML: MAP Connector Part Numbers
I'm on the MAP connector search again. I still haven't found a source
for these darn things. I would be greatly appreciative to anyone that
will take the time to check their MAP connector on the wiring harness
for part numbers. I have a '96, so I'm guessing that any of the
connectors from around a '94 through a '98 will be the same. Thanks
again! Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:13 EDT