I'd like to see that dyno run Steve. send it to mal5@ualberta.ca please
thanks.
-- Canuck -------------------------------------------- Y2K, 4.7L, 2wd, 5spd, The Ultimate K&N HomeBrew, Flowmaster CatBack, Home Ported TB http://www.twistedbits.net/WWWProfile/dakota/Vyikam1jjgNN6"Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL> wrote in message news:5F7587961057D211ABE9004095102F7803C5AB90@ex.mctssa.usmc.mil... > > Forget the stock market. I watch a 375,000 gain go to a measly 85,000.00. > > I have the original dyno run with the following items: > > 2000 4.7ltr Extended Cab 2wdr (3.55:1 ratio drive) > > added mods: Bosh 4 plus > 68mm TB (F&B beta 1st test) > Z Tube (7 inch cone) > 180 degree thermostat > Jet Stage II > > 218 RWHP > 272 RWTQ (cut off was 97MPH due to Dodge > Chip) > > If you like a copy, I will forward it to you. > > > -------------------------------------- > Steven St.Laurent > C4i System Engineer > C4i Engineering Branch, PSD, MCTSSA > MARCORSYSCOM, U.S. Marine Corps > Office (760) 725-2506 (DSN Prefix: 365) > "Never be content with somebody else definition > of you. Instead, define yourself by your own beliefs, > your own truths, your own understanding of who > you are. Never be content until you are happy with > the unique person GOD has created you to be." > > -----Original Message----- > From: crm [mailto:tb.crm@verizon.net] > Sent: Tuesday, August 13, 2002 7:44 AM > To: dakota-truck@dakota-truck.net > Subject: DML: Re: RE: Re: RE: Re: Jet chip > > > steven, what were the gains on the dyno? > > the only reason i am starting to think of this again is that my > cams/intake/flash money is now tied up in a stock market that seems to have > an aversion to me getting my mods. i might be willing to chance it if i can > find a used one (stage 2). > > thanks, > > -adam > ----- Original Message ----- > From: "Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL> > To: <dakota-truck@dakota-truck.net> > Sent: Tuesday, August 13, 2002 8:43 AM > Subject: DML: RE: Re: RE: Re: Jet chip > > > > > > Been there all ready. I had a stage II and had no problems but experience > > as advertised. It was tested on a dyno machine, along with Bruce's 1st > beta > > TB unit. > > > > -------------------------------------- > > Steven St.Laurent > > C4i System Engineer > > C4i Engineering Branch, PSD, MCTSSA > > MARCORSYSCOM, U.S. Marine Corps > > Office (760) 725-2506 (DSN Prefix: 365) > > "Never be content with somebody else definition > > of you. Instead, define yourself by your own beliefs, > > your own truths, your own understanding of who > > you are. Never be content until you are happy with > > the unique person GOD has created you to be." > > > > -----Original Message----- > > From: crm [mailto:tb.crm@verizon.net] > > Sent: Monday, August 12, 2002 5:30 PM > > To: dakota-truck@dakota-truck.net > > Subject: DML: Re: RE: Re: Jet chip > > > > > > what about the stage 2 for the 4.7's? too much conflicting information , > but > > most from people that havent actually used/tested one... > > > > -adam > > > > ----- Original Message ----- > > From: "Bernd D. Ratsch" <bernd@texas.net> > > To: <dakota-truck@dakota-truck.net> > > Sent: Monday, August 12, 2002 6:10 PM > > Subject: DML: RE: Re: Jet chip > > > > > > > > > > Jet Stage-II works well on the V6...and is the only "easy to install" > > > option...unless you go with custom programming. > > > > > > - Bernd > > > > > > -----Original Message----- > > > From: owner-dakota-truck@dakota-truck.net > > > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Canucker > > > Trucker > > > Sent: Monday, August 12, 2002 2:40 PM > > > To: dakota-truck-moderator@bent.twistedbits.net > > > Subject: DML: Re: Jet chip > > > > > > > > > > > > you could check your local dumpster because I think most people who have > > > bought one ended up throwing them out. > > > > > > I've never actually bought one, but I hear they don't really work. If > > > you still want one though, you may find one here, or try posting a > > > classified ad on the net somewhere (Dodgedakotas.com?). > > > > > > thats my $.02 > > > > > > -- > > > Canuck > > > -------------------------------------------- > > > Y2K, 4.7L, 2wd, 5spd, The Ultimate K&N HomeBrew, Flowmaster CatBack, > > > Home Ported TB > > > http://www.twistedbits.net/WWWProfile/dakota/Vyikam1jjgNN6 > > > > > > > > > "Curt Kitts" <cwkitts@prodigy.net> wrote in message > > > news:4.2.0.58.20020812162525.00979650@pop.prodigy.net... > > > > > > > > Anyone know where i can get a stage 2 jet chip for a 2002 3.9l v-6 > > > > auto. Anyone on the list have one they want to get rid of? Dont want > > > > to pay full price, if i can help it. We on a budjet here. > > > > > > > > > > > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:14 EDT