You can bypass (short) the solenoid to spin the starter. This will tell you
which one is the problem. My guess would be the solenoid. If it were the
starter, it most likely wouldn't spin at all. I would also make sure the
cables to the battery are making good contact.
Rich - Ashburn, VA
-----Original Message-----
From: Ncfisher@aol.com [mailto:Ncfisher@aol.com]
Sent: Monday, September 09, 2002 10:46 AM
To: aol@dakota-truck.net
Subject: DML: starting problems
everytime i turn the key its clicks but nothing happens.If i do it enough it
will eventually trun over although sometimes it does it on the first try.How
do i find out if its the starter or the selenoid?
92 v6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:20 EDT