Re: A few cam questions... need advice!

From: greg conner (dodgeboy93@hotmail.com)
Date: Fri Sep 20 2002 - 00:10:04 EDT


those are premag v6 cams only, they will not work in a 92 and up magnum v6

>From: "Wes Weems" <wweems@fix.net>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: Re: DML: A few cam questions... need advice!
>Date: Thu, 19 Sep 2002 20:45:25 -0700
>
>
>Uhh well I think they do... I can get you part #'s if you dont beleive
>me...
>a overall performance cam, and then a low speed power cam...
>
>3.9L V6 Hydraulic Camshafts
>Part Number Advertised Duration O-Lap Center Line Lift Recom. Spring
>Tappets
>Applications & Comments
>*P4452806 240/240 20 110 .405/.405 P4286813 Y Perf. RV - low speed power
>*P4452808 248/256 32 110 .410/.425 P4286813 Y Mild comp. & perf. RV
>
>
>----- Original Message -----
>From: "Gary Hedlin" <ghedlin@theramp.net>
>To: <dakota-truck-moderator@bent.twistedbits.net>
>Sent: Thursday, September 19, 2002 8:16 PM
>Subject: Re: DML: A few cam questions... need advice!
>
>
> >
> > I know for a fact Mopar Performance does not make a V6 Cam. I asked
>Koller
> > Dodge today when I ordered my gaskets, timing chain, & springs.
> >
> > Not to get off topic, but wouldnt you want to replace the valves while
>your
> > in there?
> >
> >
> > Gary Hedlin
> > "The Crazy Quadraplegic"
> > ghedlin@theramp.net (business)
> > ragingquad@yahoo.com (personal)
> > **Also Webmaster For**
> > http://garyhedlin.com
> > http://socaldakota.com
> > http://scsilverdak.com
> > http://assistivetechnologies.com
> > ...And Many More!
> >
> > ""Gabriel A. Couriel"" <BigGabe@FIUFIJI.com> wrote in message
> > news:LGEHJPEPBFBBEPPBEOFMCEFMCAAA.BigGabe@FIUFIJI.com...
> > >
> > > and they make them for V6? i thought that the cams sold by MP were V8
> > only.
> > >
> > > Gabe Couriel
> > > http://frontpage.tripod.com/fijigabe0
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Wes Weems
> > > Sent: Thursday, September 19, 2002 6:46 PM
> > > To: dakota-truck@dakota-truck.net
> > > Subject: Re: DML: A few cam questions... need advice!
> > >
> > >
> > >
> > > you can get a mopar performance mild perf cam, for lowend power, and
>its
> > > actually cheaper than a regular replacement, but the dealer said
>chrysler
> > > doesnt have them in stock and it would be weeks before they could get
>one.
> > >
> > > Wes
> > > ----- Original Message -----
> > > From: "Gabriel A. Couriel" <BigGabe@FIUFIJI.com>
> > > To: <dakota-truck@dakota-truck.net>
> > > Sent: Thursday, September 19, 2002 3:13 PM
> > > Subject: RE: DML: A few cam questions... need advice!
> > >
> > >
> > > >
> > > > i think he also asked about performance cams for the V6, i'm
>interested
> > on
> > > > this subject, so are there any cams to help out the V6 on mildly
> > modified
> > > > engines?
> > > >
> > > > Gabe Couriel
> > > > http://frontpage.tripod.com/fijigabe0
> > > >
> > > > -----Original Message-----
> > > > From: owner-dakota-truck@bent.twistedbits.net
> > > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > > > jon@dakota-truck.net
> > > > Sent: Thursday, September 19, 2002 5:32 PM
> > > > To: dakota-truck-moderator@bent.twistedbits.net
> > > > Subject: Re: DML: A few cam questions... need advice!
> > > >
> > > >
> > > >
> > > > "Wes Weems" <wweems@fix.net> wrote:
> > > >
> > > > : will I need new bearings lifters etc? My FSM shows how to pull the
> > > lifters
> > > > : and clean em, and they work for now... I am just so damn broke I
>cant
> > > > afford
> > > > : anythign. =(
> > > >
> > > > No, you shouldn't need to change the bearings and lifters unless
>they
> > > > are damaged. (Normally you would replace the lifters on a flat
>tappet
> > > > cam, but since the Magnums use a roller cam, they can be re-used).
>As
> > > > far as the bearings go, if they are bad, the engine would probably
>need
> > > > to be pulled to replace them anyway, so hope that they are good.
>:-)
> > > > (They should be OK though.)
> > > >
> > > >
> > > > --
> > > >
> > > > -Jon-
> > > >
> > > > .---- Jon Steiger ------ jon@dakota-truck.net or
> > > jon@jonsteiger.com -----.
> > > > | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot -
>SEL
> > > |
> > > > | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96
> > FireFly
> > > |
> > > > `-----------------------------------------
> > > http://www.jonsteiger.com ----'
> > > >
> > >
> > >
> >
> >
>

Greg Conner
1996 RC
3.9 hybrid

_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:22 EDT