I opt for the choice I made which is #5
Order the 318-390 stroker kit from Hughes engines. Send the block to a shop
to have it bored .030 over (the shops in my area charge about $300 for a V-8
give or take a little depending on the shop). Buy the magnum engines book and
put the motor together yourself (it aint that hard). the total cost should be
aroun $2300 and you wont have to buy a 360 computer or torque converter.
John S
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:22 EDT