Actually I took those off. I just needed them to clean up my mess :)
I have a "S" bolt I am going to use and some foam rubber around the base of
the airhat. With those it should stay put. Plus I beleive the edge of the
airhat actually sits around the base of the TB.
Marty
http://members.cox.net/got-speed
""Ray"" <bpracing@worldnet.att.net> wrote in message
news:DHELJEKAGJCDGEGBEHHJOEPKCDAA.bpracing@worldnet.att.net...
>
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Marty Nowak
> > (Got-Speed)
> >
> > Ok well I got my TB in, and decided to modify it. Well thats the whole
> > reason for buying it. I chopped of everything on the top with a dremel
cut
> > off wheel and sanded it down with a sanding disc. It was very
> > wavy on top so
> > I took it to the machine shop and $30 later they milled it flat.
> > Marty
>
> Yep, it is definitely flat. They even took off the little tabs that
center
> the air cleaner.
> And you're going to retain the air cleaner base with........??
>
> Ray
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:23 EDT