That's good to hear, I guess it's hit or miss then. Now I just need to get
off my butt and install the ones I bought :P Too busy getting ready to
leave, I'll be lucky if I have time to get a good coat of wax on her before
I put her in storage.
-- Dave Bensalem, PA '02 R/T RC Flame Red http://www.dragtruk.com/ENTRIES/KECEE245JCKM.html""Ray"" <bpracing@worldnet.att.net> wrote in message news:DHELJEKAGJCDGEGBEHHJMEBGCEAA.bpracing@worldnet.att.net... > > > > -----Original Message----- > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Dave > > Downing > > > > Are you using these Ron? I heard from a couple of R/T guys that have had > > these melt on them, which is why I went with the R&M billet looms. Just > > curious.> Dave > > > > ""Ronald Wong"" <ron-wong@cox.net> wrote in message > > > > > > The company that makes them is Made 4 You. Their website is: > > > http://www.made4uproducts.com/> > Ron > > > > Dave, I'm not Ron :-) but I've used the Made 4 You looms on my MSD 8.5 wires > for about 5 years. My headers sweep up toward the valve covers but I've > still never had a problem with the looms. > > Ray > http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:24 EDT