3/4" is about right.
----- Original Message -----
From: Ray <bpracing@worldnet.att.net>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, September 27, 2002 8:45 PM
Subject: DML: RE: GenII 2WD Suspension(HELP)
>
>
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Matthew
> > Intihar
> >
> > I just got the front coil spring spacers removed from my '92, and the
> > shop installed new coils. My question is how much room should be
between
> > the lower control arm bump stop and the frame? As it stands, I can only
> > get my pointer finger between it and the frame; <snip>
> > Matt
>
> I use dropped spindles (2"), stock springs, and had about the same amount
of
> space you described.
> I cut off about a 1/2 in to gain a little more clearance.
>
> Ray
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT