> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Matthew
> Intihar
>
> I just got the front coil spring spacers removed from my '92, and the
> shop installed new coils. My question is how much room should be between
> the lower control arm bump stop and the frame? As it stands, I can only
> get my pointer finger between it and the frame; <snip>
> Matt
I use dropped spindles (2"), stock springs, and had about the same amount of
space you described.
I cut off about a 1/2 in to gain a little more clearance.
Ray
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT