I had no problems with MSD Super Conductors on mine. PN 32189.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Josh
Battles
Sent: Tuesday, October 29, 2002 9:58 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Spark Plugs/wires WAS:Tuned Up
I've got MSD Heli Cores for a 318/360 on my V6... The fit was pretty
terrible. Had I actually had a 318/360, there was no way in h-e-double
hockey sticks that they would have worked. Weird. I've never had a problem
putting MSD wires on my fords or chevys... They're nice wires, if you can
get them to fit, they perform very well. I think i'm gonna go back to
magnecore or taylors the next time though.
-Josh
2000 CC V6
"kids on their bikes haven't got a chance..."
<jon@dakota-truck.net> wrote in message
news:apl5fd$2h9$1@bent.twistedbits.net...
>
> Kevin Sellstrom <ksellstr@softcom.net> wrote:
> [...]
> : While I was at it, I managed to tear the end off one of the Mopar plug
> : wires...time for new/better ones. what have people had good experience
> : with? MSD (who only sell a universal set for these engines), Mopar
> : Performance, etc?
>
>
> MSD sells an 8.5mm SuperConductor set for the 5.2/5.9. I
> believe the part number is 32189. Magnecor is probably the
> best wire out there, but they are pricey. I recently ordered
> some MSD SuperConductors for my 440 and the fit was terrible -
> the boots were way too long. Maybe they would work on a B
> body, but there wasn't even room for the boots to clear the
> fenders on the cuda. Anyway, I replaced them with a set of
> Taylors which had an excellent fit, and were about half the
> price. They seem like a good wire, but I suppose time will
> tell. The MSD set for my Dakota was a good fit. (Check out
> the install if you like, in the "upgrades and modifications"
> section of the DML Home Page - www.dakota-truck.net) I
> replaced the MSD wires with a set of Magnecors, but only
> because one of them fell out of the loom, laid up against a
> header pipe and burned through the insulation.
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------ jon@dakota-truck.net or
jon@jonsteiger.com -----.
> | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL
|
> | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly
|
> `-----------------------------------------
http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:19 EST