its a 97...i hope its not too difficult!
ill take pictures and explain how to do it when i do mess with it (and
upload it to the web of course)
thanks!
-chris
jon@dakota-truck.net wrote:
>SEMIHEMI01@aol.com wrote:
>
>: Chris,
>: There's a good chance the bulb is loose or burned out. It's a bitch to
>: get to, you have to be a contortionist to get under there to it, Depending on
>: what year it is.
>: I've only heard a a very few people who had dash bulbs go bad. Maybe some of
>: the other guys can give you some advice on it. "Sir Bill"
>
>
> I'm not sure what year Chris has, but if its a Gen I or II, its pretty
>easy to get to the dash - there are some screws around the front of the
>dash and the whole dash cover pretty much comes out (there is a panel or
>two down under the steering wheel too which might need to be removed),
>then you can actually pull the whole instrument cluster out fairly
>easily, with just a couple of plugs on the back. If its a GenIII, then
>it may be a whole 'nother ball of wax - I haven't had the pleasure of
>taking one of those apart yet. :-)
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:28 EST