Ahhh.. just as I was thinking... I'm about all done with the bolt-ons, now I get to really screw the engine up =D
Well, glad I just bought that FSM.. time to start making some use outta it.. hehe
>Ken-- you need an M1-- a set of 1.7 rockers, headers... those will help... N02 ain't bad either--- :)
>
>
>Sam
>
>
>
> From: <kenallgood@cox.net>
> Date: 2002/12/09 Mon AM 10:15:11 EST
> To: dakota-truck@dakota-truck.net
> Subject: DML: Let the DML down
>
>
> Arrrgghhh... sorry to say, I let yall down.... so read on, and maybe you can help me in my dilema :-)
>
> Driving home from my singles group last night, pulled up next to a early 90's Crustang 5.0 LX at a light.. 55mph speed limit on this road, so you know we're going at it :-)
>
> Anyway... Off the line, we went.. he spun his tires a little bit and I got a small jump on him (didn't power brake either for good launch, so it about evened itself out).. Anyway, nose-to-nose up to 45, and then he started pulling away.. 55 he has a 1/2 carlength on me, 65 he has about 1.5 carlengths on me when I pull up... Was hoping I would do better on the top end with the recently added F&B 50mm TB, but, I guess not too bad seeing it was a 5.0 which they run about 14.00... my best guesstimate on my 1/4 time is 15.00.. but anywhere, here's my list of mods:
>
> Last time at track: 15.8 (with strong headwind at VMP, only time i've been to track) - Mods at time: Quick-D Intake, Hypertech PCM, Gibson Catback.
>
> Now, in addition to the above - F&B 50mm TB, Accel Ignition system, IAS adjuster (was not in use at time, around 35-40deg outside), Mopar PCM (CA-emmissions model - used in conjunction with the hypertech PCM)...
>
> First thing I need to do I think, is go on a dyno with the stock PCM, check my numbers.. then the Hypertech and check numbers, then the Mopar PCM, then both.... see where I get my best numbers at... Maybe I can pick up 10-15hp in the right setup there...
>
> After that, my thoughts are Trans-go shift kit, Headers...ummmm not really sure after that... I'm not really in the market for a Supercharger, nor do I want to go with nitrous.. want it to be NA all the way, and would possibly like to get around 14.0 or even high 13's, though I don't think that's very likely?? Not without spending lotta $$$$... oh SRT-8, I cannot wait!
>
> 1 more thing - with my 15.8 time and when racing the crustang, that was with a weight of around 4400lbs (120 lb speakers/zmp/box, hitch, spare all on)... So I can get maybe .2 there at the track
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:13 EST