Well, I figure this way.. currently running 3.9vg with 3.55 and 31x10.5x15,
drastic wheel reduction in power.. can still turn them but not well. 3.92
would be good, but I am left in same boat as im in now, no ground clearance,
hence the axle swap. Axle will have minumum of 4.56 powered by 318 and
turning likely 35x12.5x15(16) not sure on rims yet prolly be 15 though
If I dont like the wheel torque, then I will get 5.11 or so..
With the way my lucks going I wont get to start my truck till its to late to
make the meet....
Wifes car had a blow out on Thursday, got a new Badyear GTII 225/50R16 on it
saturday morning only to find out that the rim is fscked.
Of all the flat tires and rim problems I have seen or caused, never have I
seen anything like this..
Only one spot(inner edge) of rear wheen is damaged. About a 1 1/2" flat
spot its balanced now but my new tire has a warped lump to it.. so off to
the dealer today to see what they got.. that or every friggin tire shop
around till I find some some1 has taking off to replace with custom..
Ebay had a set for $150 bid.. so I may have to go that route 8*(
Bill Day
Linux 2.2.20-1tr i586
1:10pm up 19 days, 4:11, 0 users, load average: 0.00, 0.00, 0.00
We're still up at irc.openprojects.net @ #linux-users
or irc.freenode.net @ #linux-users
http://counter.li.org #83358
http://sxs.daysdomain.com/
----- Original Message -----
From: "Terrible Tom" <SilverEightynine@earthlink.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Monday, December 23, 2002 2:28 AM
Subject: Re: DML: 4.56 the max for 9.25"?
>
> I have an uneasy feeling about this. I'm definatly bringing my
> camcorder and more film (and a new camera) to next years BBQ....
> this oughta be good! ..... I have Norm's phone number... I'll call and
> tell him to set aside a few flatbeds for July. ;-D
>
> I distinctly feel a friendly, unoffical,"who is going to show up with
> the most outragious rig" contest, brewing up here for the 5th Meet!
> Should be an interesting set of trucks rolling down King Drive come
> summer time.
>
> Them poor locals.... (shaking head)
>
>
> jon@dakota-truck.net wrote:
> > I was ummm, doing some long range planning in my head last night
> > regarding the Ram... :-) As far as I know, 4.56s are the shortest
> > gears currently available for the 9.25" Chrysler rear end. Is that
> > correct? I could get some insane gears for the Dana 44 in the front
> > axle, but it looks like I will be limited by the selection available
> > for the 9.25". Randy's doesn't seem to carry anything shorter than
> > 4.56, so I'm guessing nothing beyond 4.56 exists?
> >
> > Thanks!
> >
>
>
>
> --
>
> --------------------------------------------------------------------------
--------------
> Terrible Tom
>
> "It's a living thing... It breathes, it eats, ...and it hates..."
>
> Silver '89 Reg Cab, V6, Auto, 8 footer, 4x2
> Silver '89 Reg Cab, V6, Auto, 8 footer, 4x4 w plow - (aka Granpa)
>
> AIM Screen name: SilverEightynine
> Yahoo Messenger: SilverEightynine
>
> DML Profile URL:
> http://www.twistedbits.net/WWWProfile/dakota/LkxxVw49jp7dU/
>
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.431 / Virus Database: 242 - Release Date: 12/17/02
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:15 EST