If it is not too much trouble, a couple pics would be great. Thanks for the
link.
Gregg
"Matthew Intihar" <challengerman@juno.com> wrote in message
news:20021231.100050.6800.0.challengerman@juno.com...
>
> Here's a link to my write-up on the install of procarparts white
> gages(same as the silver ones).
> http://www.dakota-truck.net/ARCHIVES/0211/0112.html
> After running them for awhile, they're holding up and still look good,
> but make sure you use some good double sided tape. My truck doesn't have
> power mirrors, so I went to a local yard and picked up a light switch
> that had a spot for the mirror control, and that's where I put the dimmer
> switch. I can get some pics if you're interested. As for the
> instrument bulbs, they just twist out of the back(you have to pull the
> whole cluster though). HTH!
>
> Matthew
> '92 CC 3.9L 4x2, Procarpart's White Face Gages
> Herculiner, Dynomax cat-back, and 14x3 open element
> AR-767 w/Goodyear Eagle 1 Nascar 275/60R15
>
>
> On Tue, 31 Dec 2002 00:34:52 -0500 "Gregg" <GTOmo@onlineracin.com>
> writes:
> >
> > Hey folks.
> >
> > I checked through the archives, but did not come up with much.
> > This
> > question is to anyone that has used the procarparts.com white face
> > guages
> > for the 91-96 dakotas.
> >
> > How was the install? I am looking at the silver reverse one (w/o
> > the large
> > glowing circle). Also, I think that there are some burnt out bulbs
> > in my
> > dash/guage area...it has some dark areas, how hard are these to
> > replace?
> >
> > TIA
> >
> > Gregg
> > 92 CC V6
> >
> >
> >
> >
>
> ________________________________________________________________
> Sign Up for Juno Platinum Internet Access Today
> Only $9.95 per month!
> Visit www.juno.com
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:17 EST