What I did was use the factory bracket and a straight stud instead of the "s"
shaped one. I put a nut on the stud and snugged it against the factory stud
bracket for a little extra security.
--- Russ Borman <xjruss@hotmail.com> wrote:
>
> The airhat hasn't cracked. There's nothing wrong
> with the intake itself, but the stud that screws into the hole in the
> throttle body keeps stripping out that hole (damn aluminum!), I've
> been screwing it in a little further every after every mishap, then
> tightening it just barely snug, but it keeps stripping out eventually.
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:42 EST