OK, Richard. Im going to give Toms idea a go after bit, he suggests
removing the fan resistor from firewall and attempt cleaning off the
contacts on it before replacing it...
I just really needed some one else witha GenII to confirm I wasnt loosing
my mind 8-)
Bill Day
Linux 2.2.20-1tr i586
9:10am up 12 days, 14:45, 0 users, load average: 0.00, 0.00, 0.00
We're still up at irc.openprojects.net @ #linux-users
or irc.freenode.net @ #linux-users
http://counter.li.org #83358
http://sxs.daysdomain.com/
----- Original Message -----
From: "Richard A Pyburn" <rap777@juno.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, January 17, 2003 7:40 AM
Subject: Re: DML: OK GenII lovers...
>
>
> On Thu, 16 Jan 2003 18:45:02 -0600 "Jon N. Benignus"
> <blkwidow1@primary.net> writes:
> >
> > > anyone verify whther GenII fan speeds are 3 or 4...?
> > Full left is off, then speeds 1-4. If the truck is moving and the
> > temp
> > control is anywhere but full left, outside air will enter the cab
> > through
> > whichever position the air is set for.
> > In DEF position and fan on, A/C compressor is activated.
> >
> > Jon
> > STL MO
> > 92 SC 3.9
>
> Same with my '95. The setting under the fan icon is a fan speed setting
> not a dead spot as you described it. HTH
>
> Richard
> >
> >
>
> ________________________________________________________________
> Sign Up for Juno Platinum Internet Access Today
> Only $9.95 per month!
> Visit www.juno.com
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/03
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:43 EST