Hey, Steve!
<snip> What do you need (tool-wise) to get the calipers dislodged on a 2001
4x4 Dak?<snip>
If DC didn't change anything from 2K to 2K01, make sure you have a 7mm allen
wrench or a 7mm driver for you socket wrench. It's needed to get the caliper
pins loose. 'Course you may also need a dead blow hammer, & penetrating oil.
Other than that, the only "special tool" is a BIG C-clamp ( 7-8") to
compress the piston in the caliper.
HTH,
Bob Smith (DAKSY2K on AIM)
((BTDT!)
Averill Park, NY
2K DAK SY Sport + V6 4X4 5 Speed
WebPage URL: http://home.nycap.rr.com/daksy/
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:45 EST