Thank you,sir! Steve P.
--- DAKSY <rsmith13@nycap.rr.com> wrote:
>
> Hey, Steve!
>
> <snip> What do you need (tool-wise) to get the
> calipers dislodged on a 2001
> 4x4 Dak?<snip>
>
> If DC didn't change anything from 2K to 2K01, make
> sure you have a 7mm allen
> wrench or a 7mm driver for you socket wrench. It's
> needed to get the caliper
> pins loose. 'Course you may also need a dead blow
> hammer, & penetrating oil.
> Other than that, the only "special tool" is a BIG
> C-clamp ( 7-8") to
> compress the piston in the caliper.
> HTH,
>
> Bob Smith (DAKSY2K on AIM)
> ((BTDT!)
> Averill Park, NY
> 2K DAK SY Sport + V6 4X4 5 Speed
>
> WebPage URL: http://home.nycap.rr.com/daksy/
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:45 EST