Thanks ...It must be quite a bit smaller than I had imagined it.
On 2/8/03 11:44 PM, in article 000001c2cff5$d0d1e930$6401a8c0@billnis,
""Bill Nissley"" <bill@nissley.com> wrote:
>
> It's mounted in the cab fuse box as indicated in my photo, but you could
> mount it any where you want. I would avoid putting it in the engine
> compartment though.
>
> It has 4 wires: +12v, ground, signal in and signal out.
> You cut the wire (WT/OR) going from the anti-lock brakes terminal 12, to
> the Power Control Module Terminal 27.
>
> Bill - KG6ONB
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Gary Bower
> Sent: Saturday, February 08, 2003 6:02 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: RE: Electronic speedometer ratio adapters
>
>
> Which fusebox is it mounted in? Under hood?? or inside cab??
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:50 EST