RE: Loose Rocker = loss of oil?

From: Rick Barnes (barnesrv@attbi.com)
Date: Tue Mar 18 2003 - 18:53:08 EST


Sam, I agree...I have had GM oil pressure sending units fail and loose a lot
of oil..good call there too.
Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of srp@cox.net
Sent: Tuesday, March 18, 2003 6:45 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Loose Rocker = loss of oil?

You also did an M1 recently.... right??? Check for leaks on the back near
the distributor...

The oil pressure drop, WITH plenty of oil-- could be a sending unit-- also,
you did mention during the motor backwards, and messing with the distributor
some-- whichs brings up the question of the oil pump itself.

Loose rockers won't cause you to consume oil like that...

Sam

>
> From: "Ken Allgood" <kenallgood@cox.net>
> Date: 2003/03/18 Tue PM 05:50:52 EST
> To: <dakota-truck@dakota-truck.net>
> Subject: DML: Loose Rocker = loss of oil?
>
>
> Hey guys, I'm wondering if a rocker that isn't tightened down quite enough
> will cause lose of oil. I've put about 220 miles on my truck since
> Saturday. First, Sunday evening, after about 115 miles or thereabouts, I
> was pulling into a parking spot, and noticed my check gauges light came
on.
> Look at my gauges and my oil pressure is on the very bottom of normal
> reading. I wait a little bit, come back and check my oil, and barely get
> any oil on the dipstick (that I can see anyway). So I get another 3 qts
> into the system. Drove it about 50 miles today, and seems it's low again.
> Also, I'm noticing that once the engine warms up, it tends to vibrate a
> little bit (also my check engine light has come on). I believe that's a
> sympton of a rocker being a tad loose too isn't it?
>
> Another weird thing. Driving home, sitting at a stoplight, I notice my
oil
> pressure dropped, and Check Gauges Light came on, then it came back up and
> light went off. Got home, checked the oil and it's well into the SAFE
> area... Thoughts???
>
> Ken Allgood
> 97 CC SLT 5.2L
>
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:00 EST