Get so many from you, hard to read it all, much less maintain all that info
:P
Thanks, see if I can get to that this weekend :)
Ken Allgood
97 CC SLT 5.2L
----- Original Message -----
From: "RayB" <bpracing@worldnet.att.net>
To: <dakota-truck@dakota-truck.net>
Sent: Wednesday, April 02, 2003 9:24 PM
Subject: DML: RE: Throttle Valve Cable adjusting
>
> > -----Original Message-----
> > What's the best way to adjust the Throttle Valve Cable if I want to get
a
> > higher upshift? I have the FSM here on how to adjust it, but not sure
how
> > to make it more aggresive........
> >
> > Ken Allgood
>
> Gosh Ken, don't you read anything I post? ;-) I posted that under "how
to
> make some REAL power" on 3/30. Here it is again... adjust the throttle
> valve (TV) cable per the FSM. What you want to achieve is at WOT, the
> kickdown lever on the side of the transmission is at full travel rearward.
> Have someone move and hold the throttle wide open (with the engine OFF)
> while you observe the movement of the kick-down lever on the side of the
> trans (from underneath). Then see if the lever can move any farther
> rearward. If it can, then you need to adjust the cable more at the
throttle
> body till you achieve that.
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:09 EST