> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> kenallgood@cox.net
>
> Was just taking a glance at this TSB, and was wondering something
> (since I'm losing oil, presumbly the Belly pan gasket).
>
> When I put on the Mopar Chrome Valve Covers when i did the Crower
> 1.7 Rockers, I had to put the Valve Cover Breather Hose Port in
> the front oil on the Valve Cover instead of the rear, because the
> hose wouldn't reach all the way to the rear. I don't expect this
> really makes any difference, but you never know.... Might this
> be causing any problems?
There should be a baffle under the valve cover holes for the PCV valve and
the breather. If you put either where there is no baffle then oil could be
sucked into your engine.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:12 EST