You should get it pretty quick.... had to search through my throttle body
drawings to get them.
-- Gary Hedlin President Hedlin Web Designs http://www.hedlin.net ""Josh Battles"" <jbattles@bankfinancial.com> wrote in message news:b8jpo5$8db$1@bent.twistedbits.net... > > can you send me the schematic Gary? I think you had said you have the > autocad drawings... > I'm probably gonna put racing seats in this summer, and I'd really like to > make a new console that will hold my new 10" brahma sub... > > -- > - Josh > Lowered 2000 Dakota CC 3.9L > > > ""Gary Hedlin"" <ghedlin@theramp.net> wrote in message > news:b8jlnq$1cr$1@bent.twistedbits.net... > > > > Well, its not quite done yet... still need to do the paint and vynl work. > > But when I do, I'll post the pics. > > > > > > -- > > Gary Hedlin > > President > > Hedlin Web Designs > > http://www.hedlin.net > > ""BARRY OLIVER"" <DHSPA58@dhs.state.il.us> wrote in message > > news:sead095d.059@mail.dhs.state.il.us... > > > > > > Gary, I would like to see specs/ pictures of this creation... post it? > > > > > > >>> ghedlin@theramp.net 04/27/03 07:02PM >>> > > > > > > You may want to look at building a center console to fit it in. Since > you > > > have 11 inches between the seats, you can mount the amp on the bottom, > of > > if > > > you build it up higher, you can mount it to the side of the console. I > > > designed my center console to fit my amp, inverter, cd changer and a 10" > > > sub. It only shows that with a little enginuity, you can fit a lot of > > crap > > > in a small space. :) > > > > > > > > > > > > -- > > > Gary Hedlin > > > President > > > Hedlin Web Designs > > > http://www.hedlin.net > > > "Droo" <03dakotaCC4.7_4x4@comcast.net> wrote in message > > > news:3EAC52C9.20700@comcast.net... > > > > > > > > > > > > I am currently having a dilema on finding a place for an amplifier. I > > > > was hoping to get it under one of the front seats, but the amps I am > > > > looking at look like they will be too big. I want to get a 5-channel > > > > amp. I'm not looking to spend a ton of money on the stereo system. I > > > > wanted to get the Alpine F320. It's basically 10" x 13". The 10" > > > > dimension would prolly just squeeze in between the rails, but those > are > > > > the sides for the wires and I'm afraid I won't have the room to do > that. > > > > I'm not looking to build anything custom to make this work. Just > hunting > > > > for ideas or the way some of you have dealt with it. I'm looking for a > > > > stock appearance. I'm looking to install the Q-Custom enclosure > > > > underneath the jump seats in the back. Maybe someone knows of some > > > > smaller sized amplifiers. > > > > > > > > -- > > > > -Droo > > > > Email: 03dakotaCC4.7_4x4@comcast.net > > > > > > > > "Remember: No one has the right to touch you in your bathing suit > > > area." -Jack > > > > > > > > > > > > > > > > > > > > > > >
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:13 EST