<B1LLYW@aol.com> wrote in message news:197.1a6cba25.2bf77e92@aol.com...
> An 8 3/4 swap is fairly straightforward on a Gen II, from what I can
gather.
> Nearly all of them came in the 5 on 4.5 bolt pattern, like Gen I Daks.
Uhhh... My '92 2wd has the 6 on 4.5 bolt pattern on the rear. If you mean
that the 8.75's came in 5x4.5, that's a different story.
> I've heard you can convert the front to 5 on 4.5, just by swapping rotors
> with an 87-90 Dak. Is that all you have to do? Is it just rotors?
Provided the spindles are the same between years, I would think you COULD
just swap rotors, since you basically swap the hub and everything with the
rotors on a 2wd.
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:20 EST