The new hemi is more compact in some dimensions, but the one that matters is
the overall height and width at the point where the motor nears the
firewall.
Posted again on the RT list yesterday was to look for the hemi in a Dak in
late '05 or '06, again suggesting DC has no desire or is not able to fit the
hemi in the current body style.
Bob
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Jeff
> Durling
> Sent: Thursday, May 22, 2003 6:22 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Hemi in Dak thread
>
>
>
> Just reading the Allpar.com write up and it has a tidbit
> saying the same
> thing. Hmmm, things are starting to look even better.
>
> Jeff Durling
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Punch
> Sent: Wednesday, May 21, 2003 4:13 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Hemi in Dak thread
>
>
> http://www.findarticles.com/cf_atinds/m3012/3_180/61361674/p1/
article.jh
tml
down the page the hemi is smaller then the 5.9 engine.......
punch
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:20 EST