Re: lincoln ls v8?

From: Jim Miller WB5OXQ (wb5oxq@grandecom.net)
Date: Wed May 28 2003 - 19:06:04 EDT


The LS does not use the 4.6. It uses a much smaller displacement model
somewhere around 3.5 ltr if I remember right.
----- Original Message -----
From: "Danny Burrows" <havenx@ksni.net>
To: <dakota-truck@dakota-truck.net>
Sent: Wednesday, May 28, 2003 2:02 AM
Subject: Re: DML: lincoln ls v8?

>
> If your talkin about the 4.6L motor I can say its awesome. Pretty much
> if you feed it more air (supercharger) and inject a lil more fule into
> it (injectors are large enough) it will scream. I have seen them run in
> the 12s and 13s this way, in crown vics and Mercury LSes. They put the
> 4.6 in the P71 vics as well. Someone always asks this, THERE IS NO
> DIFFERENCE BETWEEN THE NORMAL 4.6 AND THE COP 4.6. The difference is in
> the computer and the fule/mix graph.
>
> You can get aftermarket parts.... pretty much all that is needed is a
> custom chip and a supercharger.
>
> I don't think one would have to much trouble getting 300hp at of one.
> However I would not use a lincolin, I think I would use a p71 crown vic.
> They are a lil bit lighter and don't have all the gay options that are
> in the way. However all the wires for any extra electronics are there.
> All you have to do is hook up the part.
>
> The only bad thing about them are that they are not Dakotas, and they
> don't have a bed.
>
> There are some ppl that can tell you more about them on DALnet using
> mIRC on channel #crownvicdotnet
>
> Punch wrote:
>
> >anyone own a Lincoln ls v8, pro's/cons etc.....
> >
> >
> >
> >how about aftermarket parts etc....
> >
> >
> >
> >they are 255 stock, looking to get about 300hp
> >
> >
> >
> >punch
> >
> >
> >
>
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:22 EST