Oops....wrong email address. ;)
- Bernd
>
>
> Hehehehe...no problem John.
>
> You can call me at the house after 6pm tonight - (512) 989-6385 (Please keep
> this number to yourself).
>
> I've got all of my equipment at the house and can take care of it for you as
> well.
>
> It doesn't sound like anything too serious, but I do have an extra IAC and
TPS
> at the house...just in case.
>
> - Bernd
>
>
> >
> > Bernd, thanks for the quick response, much appreciated.
> >
> > I can tell you that the bore where the TB plates sit is stock - he did not
> > remove the
> > shafts and butterflies when he milled the TB, because he had trouble working
> > out
> > the shaft screws that hold the plates in place (he couldn't back them out).
> >
> > What he -did- do was bore it up to a point (about 10mm) -above- where the
> > butterflies sit, leaving it at stock bore the rest of the way down. There is
> > no visible
> > gap between the throttle plates and the TB housing.
> >
><snip>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:30 EST