not quite that simple art!!!
you might want to get the old stuff off first!
I recommend using a rtv sealant on the manifold and the gasket end that
attaches to the water neck!
----- Original Message -----
From: "Gary Hedlin" <ghedlin@theramp.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Thursday, July 03, 2003 12:10 AM
Subject: DML: Re: T-Stat Raplcement ??'s
>
> The T-stat is located on the intake manifold. Simply undo the two bolts
> on
> the water neck, lift your upper radiator hose, and there she is... just
> lift
> up the old t-stat, replace the gasket, drop the new one in, then replace
> the
> water neck.
>
> If you want, I can scan the procedure from my FSM :)
>
> --
> Gary Hedlin
> President
> Hedlin Web Designs
> http://www.hedlin.net
>
> Gary's Wisdom- #593
>
> -Hire the handicapped.... they're fun to watch!!
>
>
> ""Eric Giblock"" <egiblock@hotmail.com> wrote in message
> news:be0asb$oo3$1@bent.twistedbits.net...
> >
> > Where is the t-stat located ? whats a good one to replace the stock
> t-stat
> > with? and any other sugguestions you could give me would be greatly
> > appreciated.
> >
> > thanks
> >
> > --
> >
> > --
> > Eric Giblock
> > egiblock@hotmail.com
> > www.gibsdakota.com ~ www.webalterations.com
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:35 EST