I have the universal mount CIPA mirrors and I think they work pretty
good. They are a little small, but I can see what I need to see. They
attach pretty good actually and the mirror image does not rattle. I
would also like to get the bigger stock mirrors and get the custom fit
mirrors, but that's for another day, these satisfy my needs for now. I
didn't like the ones that Jason has because I thought that the strap
might rub too much on the paint and the CIPA ones look cooler.
"Bill Nissley" bill@nissley.com KG6ONB
'98 CC SLT 2x4 5.2L V8 AT, White/Dftwd, 3" Fabtech lift, ORI pre-runner
light bar with PIAA 80Pro XT series lights, 32" BFG A/T's, Yellow Box
Speedo Calib., Flowmaster Exhaust, X-2000 bed cover, F/B 50mm Throttle
body, Pro Comp air intake, Viper electric fan, ASP crank pulley,
Roadmaster active suspension & RBW 'LIL Rocker 5th Wheel Hitch.
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Jason
Bleazard
Sent: Thursday, July 03, 2003 7:50 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Towing Mirrors to fit 5X7 mirrors?
You could try these, they should clip on to just about any mirror:
http://www.campingworld.com/browse/skus/index.cfm?skunum=21154
Except for the fact that they suck :-). I've seen them in person, and
they don't clip on very securely, which means that they shake a lot.
Plus
they're too small to do much good, and they probably won't stick out far
enough to see around the trailer.
We use these:
http://www.campingworld.com/browse/skus/index.cfm?skunum=14887
They work very well. CIPA also makes a mirror with a similar mount, but
the mirror surface is smaller.
you read the disclaimer? http://www.they.com/disclaimer
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:35 EST