Are there any preferences on brands/types of rotors out there? Or will just whatever advance auto/auto Zone has will be fine? Not sure when my brake pads were last replaced, how much pad should be on there before I need to look at getting it replaced? (thinking that while I'm in there, might as well do the pads at the same time if they can use it)....
Thanks
Ken Allgood
97 CC SLT 5.2L
>
> From: "Brian Tong" <thedude807@hotmail.com>
> Date: 2003/07/14 Mon AM 11:21:50 EDT
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: Brake rotors
>
>
> If I were a betting man (and I am), I would say rotors, too.
>
> If you've done brakes before, you can do these.
>
> Brian
> '99 CC 4x4 5.2L
>
>
> >From: Ken Allgood <kenallgood@cox.net>
> >Reply-To: dakota-truck@dakota-truck.net
> >To: dakota-truck@dakota-truck.net
> >Subject: DML: Brake rotors Date: Mon, 14 Jul 2003 10:39:36 -0400
> >
> >
> >Hey yall, I think my brake rotors are going out on me. When braking,
> >truck vibrates a good bit, espeically when I get below 30mph. If I'm going
> >slow, say 10-15mph, and lightly braking, you can feel the brakes grabbing,
> >then letting go, then grabbing, etc. Am I right that this would be the
> >rotors? If so, how difficult are they to replace? I have a hydraulic
> >jack, stands, and all of the standard tools. Have done brakes once before,
> >and that wasn't too difficult, but haven't done 'em on the dakota
> >before.... Thought I might do 'em to save a trip to the shop. Suggestions
> >on some good brakes and where to get 'em?
> >
> >Ken Allgood
> >97 CC SLT 5.2L
> >
>
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:36 EST