Re: on the topic of rocker arms...

From: Gary Hedlin (ghedlin@theramp.net)
Date: Mon Jul 14 2003 - 19:44:25 EDT


<srp@cox.net> wrote in message
news:20030714230017.YKPT20948.lakemtao05.cox.net@smtp.central.cox.net...
>
> The 1.7s are fine on that lift-- puts you in the .512 range, maybe a
little higher. I run the same setup, but with 1.92 RT heads.
>
> With Mopar rockers on RT heads, you'll need to cut the area around the
pushrod holes-- as the casting/geometry is a little too tight.
>
> Crower bolt on without any changes.
>
> Sam
>
> www.socaldakota.com
>

So those of us removing the oil baffles to get the crower arms to fit have
been doing it out of boredom??

Gary Hedlin



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:37 EST