hole in distributor cap

From: Patrick and Kelly Engram (patrickandkelly@erols.com)
Date: Thu Aug 07 2003 - 18:24:43 EDT


Don't tell him to put a screwdriver in the plug hole and crank it to see if
>the pistons are still connected to the rods and crank
>TonyC
>
>- -----Original Message-----
>

You should have told that idiot that he could check a spark plug by
taking one out, sticking it upside down in the 1/2" hole he just drilled
in his distributor cap, and touch the side electrode with his hand while
someone cranked the engine. If he gets the same shock he got when he
stuck the screwdriver in the hole, it would be safe to assume that the
spark plug is good!
  Patrick



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST