Found it in my manual, but they must not have fixed the manual for the 02,
because the procedure dosen't work. I guess I will have to call and get the
proper procedure..
Thanks..
"Jayson Woodruff" <woodrufj@yahoo.com> wrote in message
news:3F37F69D.80000@yahoo.com...
>
> Okay, now you made me get my manual.
>
> I didn't notice your year, but this is out of a 2000 book (p13). '01s
> and better might be different.
>
> "Programming Additional Transmitters
> Up to four transmitters can be programmed. When programming a new
> transmitter, all transmitters intended for use with this vehicle, except
> the transmitter used to start the programming mode, must be programmed
> within the 30-second programming mode. To program a transmitter, turn
> the ignition switch to the ON position with the vehicle stopped. Press
> and hold the unlock button on a currently programmed transmitter for a
> minimum of four seconds and a maximum of 10 seconds. While pressing the
> unlock button, press and release the panic button. Release the unlock
> button and a single chime will sound. This indicates that the module is
> in programming mode. Within thirty seconds, press and release the lock
> or unlock button on all transmitters intended for use with this vehicle
> except the transmitter used to start the programming mode. Successful
> programming will be indicated by a single chime. If you do not have a
> programmed transmitter, contact you dealer for details.
>
> NOTE: When programming mode is entered, programming is cleared from
> programmed transmitters and the transmitters will need to be
reprogrammed."
>
> Jay W
> 505/287 Dakota
>
>
>
> Norah Bleazard wrote:
> >>-----Original Message-----
> >>From: owner-dakota-truck@bent.twistedbits.net
> >>[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Josh
> >>Stolarz
> >>Sent: Sunday, August 10, 2003 7:13 PM
> >>To: dakota-truck-moderator@bent.twistedbits.net
> >>Subject: DML: Keyless Entry Remote
> >>
> >>
> >>
> >>Does anyone know how to program the remote to work with your
> >>vehicle? I lost
> >>a set of keys, and happen to have an extra remote laying around. It is
the
> >>same part number as my remaining working remote, there are no switches
or
> >>anything inside??
> >
> >
> > I just recently had to have the module replaced which controls the
security
> > system and both sets of remotes needed to be reprogrammed to the new
module.
> > Our remotes controlled both the power door locks and activation of the
> > security system. The reprogramming procedure had to be performed by the
> > technician using a small unit that he brought out to the truck and
connected
> > to something (I couldn't see what) underneath the dash. So I don't
believe
> > you'll be able to do it yourself with a series of ignition turns. The
> > manual only states controls you can change or modify, but not the
initial
> > programming.
> >
> > Norah Bleazard http://www.bleazard.net Toronto, Ontario
> > hers: '01 Dakota Sport 4x4, 4.7 V8, Auto, Quad Cab, black (Black
Diamond)
> > prev: '98 Dakota Sport 4x4, 5.2 V8, Auto, Club Cab, black (Black Widow)
> > prev: '95 Dakota Sport 4x2, 3.9 V6, Auto, Club Cab, black (Black Ice)
> > prev: '93 Dakota Sport 4x2, 3.9 V6, Auto, Club Cab, electric blue
> > (Enterprise)
> > his: '95 Dakota Sport 4x4, 3.9 V6, 5spd, Reg. Cab, white (White Knight)
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST