nice setup... why'd you have to set up the driver's side 3 times?
Gabe Couriel
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Jayson
Woodruff
Sent: Monday, August 11, 2003 9:20 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Race Seats installed.
Whew, this took a while. Between being extremely busy and having to do
the driver's side 3 times, it took me the better part of 2 months.
Anyways, I installed a pair of Cobra fixed back Imoloa II seats in my
RC. On the driver's I adapted the Cobra side plates to the stock slider
rails. I used the 'GT' size for my bigger butt.
On the passenger's side I bolted the seat ontop of a stack of Aluminum
bar stock and directly to the ground. It doesn't slide, but is pushed
all the way back to accomidate tall people. Over here is the 'standard'
width, which fits up to about a 32" waste.
Super high sides hold you like a glove, but make getting in and out a
bit challenging for the rookie.
Check out the pictures. I guess I should update my profile, it's a
whole Dakota out of date.
http://www.geocities.com/woodrufj/dakota/Seats/gallery.html
Be gentle on the Bandwidth (download if you want to look at them
multiple times, please don't reload, reload, reload).
Jay W
505/287 Dakota
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST