Not the orange ones.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bob Mankin
Sent: Wednesday, August 20, 2003 10:15 AM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: RE: RE: injectors
I think you're mistaken. If anything I would expect the Design III to
perform better. Better atomization and resulting mileage. Impedance is
close enough. If you want to argue that it's not exact match then your
suggestion of Accel or FMS won't fly since they are not an exact
impedance match either.
Bob
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
> Ratsch
> Sent: Wednesday, August 20, 2003 3:36 AM
> To: dakota-truck@dakota-truck.net
> Subject: RE: DML: RE: RE: injectors
>
>
>
> Design-III's don't work properly on the Design-II Dodges.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Chad
> Evans
> Sent: Tuesday, August 19, 2003 9:34 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: RE: injectors
>
>
>
> question here.
> under the bosch #3 design injectors 24lbs navigator or the "cobra"
> ones. it states that they can be used on 88-99 on the navigator and
> 00-03 on the
> cobra ones.
>
> are they that better of a design and could I use them on my 5.2. if I
> were to get the fuels rails from a newer year r/t ?
>
>
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Tuesday, August 19, 2003 9:17 PM
> Subject: RE: DML: RE: RE: injectors
>
>
> >
> > Hehehehe...what he said. ;)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> > B1LLYW@aol.com
> > Sent: Tuesday, August 19, 2003 8:43 PM
> > To: aol@dakota-truck.net
> > Subject: Re: DML: RE: RE: injectors
> >
> >
> >
> > In a message dated 8/19/2003 9:39:24 PM Eastern Standard Time,
> > kenneth@berntsen.cc writes:
> >
> >
> > > Hey Bernd
> > >
> > > Do you by chance have the part number for the FMS injectors
> > > memorized?
> > >
> >
> > check out this site:
> >
> > http://www.fiveomotorsport.com/Injector_SetsDODGE.asp
> >
> > Bill White - http://www.bionicdodge.com
> >
> > '03 Ram 1500 QC 4x4 Hemi Off-Road
> > '95 Dakota CC 4x2 - under construction
> >
> >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:48 EST