Work well in what?
Find me one nationally recognized and respected tuner who likes FMUs or
"rising rate regulators" as you like to call them. You take your 5L Mustang
to be tweaked by one of the better tuners(much deeper forced induction
knowledge base) and they'll tell you to lose it before they even touch your
stuff.
Reason they suck is they are inconsistent and the computer is constantly
having to hit a moving target with respect to fuel pressure. Used only by
those without any better tools.
Bob
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
Ratsch
Sent: Thursday, August 21, 2003 3:36 PM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: injectors
And contrary to "other opinions"...they do work very well.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
scsilverdak
Sent: Thursday, August 21, 2003 4:56 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: injectors
Ok, so how about a Boost Proportional Regulator for better fuel
control.......hehehehe!
http://www.bellengineering.net/fmu2020.htm
This is what's going to replace the FMU I'm currently running, it's much
better design and easily adjusts to achieve the fuel curve I need.
Ron-
'01 Dakota Sport RC, 4X4, 3.9
Street ,Strip, and Show
----- Original Message -----
From: "Bob Mankin" <bob@coralfarms.com>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, August 21, 2003 4:14 PM
Subject: RE: DML: injectors
>
> Personally I wouldn't put "better" and "rising rate regulator" in the
> same sentence, but that's just me ;-)
>
> Bob
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> scsilverdak
> Sent: Thursday, August 21, 2003 12:24 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: injectors
>
>
>
> I still need to install a Rising Rate regulator, for better fuel
> control.
>
> I also need to have the PCM flashed for better fuel mapping and to fix
> the timing issues once and for all....
>
> Ron-
> '01 Dakota Sport RC, 4X4, 3.9
> Street ,Strip, and Show
>
>
>
> ----- Original Message -----
> From: "Bob Mankin" <bob@coralfarms.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Thursday, August 21, 2003 1:49 PM
> Subject: RE: DML: injectors
>
>
> >
> > Ron, the '01 and later stuff idles in closed loop. Another little
> > known twist. That's why it handles the bigger injectors better than
> > the older controllers.
> >
> > Bob
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > scsilverdak
> > Sent: Thursday, August 21, 2003 10:16 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: injectors
> >
> >
> >
> > I'm running the Lincoln Navigator injectors (24lb/hr) in my
v6...........
> >
> > No problems at all except it goes full rich at 3800 under boost, but
> > it idles just fine and doesn't run rich at all at idle.....
> >
> > Ron-
> > '01 Dakota Sport RC, 4X4, 3.9
> > Street ,Strip, and Show
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:48 EST