Carbureted version...but not hard to modify for the Injector bosses.
A TB adapter plate would work well to convert - would try to fit a
"turtle" in the center of the plenum though (if possible) to prevent any
bottom end loss.
Cool Find!!! :)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of greg
conner
Sent: Saturday, August 23, 2003 10:01 AM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: injectors
I happen to of had a mopar m1 single plain 3.9 intake for the magnum
motor.
I was going to tap it for injector bosses but after talking with a few
people even with a huge 2bbl adapter teh plenum volume would be way to
small
for most applications. A buddy of mine has it in his garage currently
collecting dust.
http://www.dodgetruckworld.com/gallery/haulndak/84516.jpg
http://www.dodgetruckworld.com/gallery/haulndak/84513.jpg
http://www.dodgetruckworld.com/gallery/haulndak/84509.jpg
it started life as a 2bbl manifold, it kinda had a 2bbl flange inside of
a
4bbl flange. The guy I got it from had cut it out to use a 4bbl carb on
his
95 dak. He never got around to using it and the manifold has never been
on
a motor
Greg Conner
1996 RC
3.9 hybrid
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:53 EST
