Power distribution center. The big fusebox underhood.
Quintin wrote:
> OK, what is a PDC please?
>
>
>
> ""Rick Barnes"" <barnesrv@comcast.net> wrote in message
> news:000101c36d51$ecaf8410$0200a8c0@sys15...
> :
> : You are very welcome Ken
> :
> : Rascal
> :
> : -----Original Message-----
> : From: owner-dakota-truck@bent.twistedbits.net
> : [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of dametalr
> : Sent: Thursday, August 28, 2003 2:25 AM
> : To: Dakota Mailing List
> : Subject: DML: Viper Fan
> :
> :
> : Good info and ideas stirred up here! I will be using it on my 99 CC that
> : sees regular desert towing/hauling duty, and now has the added thermal
> load
> : of a turbo to deal with. Apparently there are Viper cats that have no
> : cooling troubles with their high hp track toys- ok, so no stop n go. My
> : recent research has turned up the figures of 2500 cfm at low speed and
> 4000
> : cfm at high speed. Should be jus fine. I run an underdrive crank pulley
> : and haven't had any juice problems, though I can imagine a 50amp surge
> could
> : dip the volts for a moment. Upgrading the alt to PDC and PDC to Batt
> cable
> : is a good idea (6ga up to 2 or 0ga)--you will be happy.
> :
> : Thanks for all of your responses (Rascal, your experience with the BM fan
> is
> : what I had remembered being talked about from some years ago--just couldnt
> : quite keep up. Thanks for your response)
> :
> : Ken in Simi Valley, CA
> :
>
>
-- -andyhttp://home.twcny.rr.com/andylevy/dakota - andy-dml@levyclan.us -------------------------------------------- "Whatever Adam does, do the opposite and you'll be fine" -Bob Tom --------------------------------------------
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:54 EST