Re: ABS Sensor change question

From: Tony Cellana (acellan1@tampabay.rr.com)
Date: Sun Sep 14 2003 - 10:49:14 EDT


Jack up the truck by the frame so the axle is hanging. Then you'll have a
ton more room to work with.
TonyC

-----Original Message-----
From: matt <nospam-leonardhome@comcast.net>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Saturday, September 13, 2003 9:08 PM
Subject: DML: ABS Sensor change question

>
>How's it done on a '99 Dakota? I crawled underneath and located the sensor
>on the diff., but with my standard socket and open-ended wrench discovered
I
>couldn't loosen the top nut and grab hold of the retaining nut (limited
>reach with the tools I have). Am I doing something wrong? Thanks in
advance.
>Matt
>
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.512 / Virus Database: 309 - Release Date: 8/19/03
>
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST