Ahem! ;)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of ronald
bruce taylor,jr
Sent: Monday, September 15, 2003 10:14 PM
To: dakota-truck
Subject: DML: Re: retrieving codes from a 99...
oh' My previous post may have been worded wrong..(forgot need to use a
better choice of words sometimes HERE!)
I'm not a factory trained technician, I work with the info and tools I
have on hand, and I have access to diagnostic equipment at work.
That's why I never use the key cycle deal on my '01,to me that's like
using a butter knife as a screwdriver when I have screwdriver handy.
(probably worded that wrong too)
Ron-
'01 Dakota Sport 3.9 4x4
Street,Strip,and Show
> ----- Original Message -----
> From: "ronald bruce taylor,jr" <taylor9565@msn.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Monday, September 15, 2003 10:52 PM
> Subject: Re: DML: Re: retrieving codes from a 99...
>
>
> > I've never used the on-off trick because I have access to a scanner,
> > I get more info from the scanner than using that trick.
> >
> > My Dak has only tossed 1 code since I've had it and I used the
> > scanner I have access to that code...it flagged the ignition coil.
> >
> > I went into the shop and tried the on-off trick, it just popped the
> > code thru the odometer (first time ever)
> >
> > I tried it before and got ZIP!..NADA!
> >
> > I never do this because it just gives the code "P###" AND no other
> > info...the average person won't have a clue or access to the
> > information unless he knows where to look or calls the dealer.
> >
> > I didn't LIE!...I needed more info (I HATE being called a LIAR)
> >
> >
> > A code scanner is still the most reliable way of pulling codes on
> > OBD-2 VEHICLE.. . . . AS IT gives the description as well as the
> > code!
> >
> > Ron-
> >
> >
> > ----- Original Message -----
> > From: "Josh Battles" <jbattles@bankfinancial.com>
> > To: <dakota-truck-moderator@bent.twistedbits.net>
> > Sent: Monday, September 15, 2003 5:52 PM
> > Subject: Re: DML: Re: retrieving codes from a 99...
> >
> >
> > >
> > > ""ronald bruce taylor,jr"" <taylor9565@msn.com> wrote in message
> > > >
> > > > 99's are OBD-2..the cycling of the key trick 3 times only works
> > > > on
95
> > and
> > > > earlier Dak's.
> > > >
> > > > 96' and up REQUIRE a scanner TO PULL THE CODE....
> > > >
> > > > Ron-
> > > > '01 Dakota Sport 3.9 4WD
> > > > Street,Strip,Show
> > >
> > >
> > > Don't lie. =P My 2k will let me pull the codes with the on-of
> > > trick. However, since I've gotten the superchips thing, it's got a
> > > scanner in
> > it...
> > > I don't have to use that little "trick" anymore.
> > >
> > > --
> > > - Josh
> > > Lowered 2000 Dakota CC 3.9L www.geocities.com/lenny187/dakota.html
> > >
> > >
> > >
> >
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST