For those with 5-speeds (or just want to keep the idle down a little bit
when tapping the brakes or putting it into gear, you can simply
disconnect the "Brake Sense" Circuit on the WHITE connector (at the PCM)
- #C24 (White/Pink). You can cut it, but recommend just taking it out
of the connector in case you want it back.
The PCM has logic in it that raises the idle slightly in Reverse and
when you step on the brakes. This is why some people notice the idle go
up a little bit when stepping on the brake pedal (more noticeable on
manual trans than on auto...but same logic in in there).
- Bernd
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:02 EST