Sounds like a stout V6 buildup.
Let me know when you want to see my taillights though. I'll go NA ;-)
Just picked up a 56lb NO2 tank so I can do my own refills. :-0
TonyC
-----Original Message-----
From: ronald bruce taylor,jr <taylor9565@msn.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Friday, October 24, 2003 1:19 PM
Subject: Re: DML: Ron's Mopar Muscle Article
>
>Thank you!.....very much!
>
>I've actually got a new goal and I think 350RWHP and 400+RWTQ is well with
>in reach for next year........
>
>The 3.9 I'm using is currently still bone stock as far as the intake,
heads,
>cam and shortblock!....
>
>A new intake is currently on it's way from Texas, after being reworked
>by Bernd Ratsch.....
>
>Scott @ GSMOTORSPORTS has agreed to build a custom set of billet fuel rails
>for this project....my intake will be used as the mock up for the v6 fuel
>rail kit,...........he may offer them after he finishes making the first
set
>thru his website, no word on that for sure yet.
>
>I've got a set of wonderfully ported v6 heads that'll match the intake
>perfectly sitting here waiting installation......Thanks to Bernd again on
>those!
>
>Marty @ KRC Performance had Comp Cams grind me a custom blower cam for this
>engine.......thanks Marty!
>
>Chad's making a few calls on a custom Superchips programmer, since no
>PCM flash is currently available.
>
>I'm also installing a billet FMU from BELL Engineering and a Holley
>255lph in-tank pump so the nitrous can be tuned better......
>
>and I've got one more trick for getting it off the line at the track
>a little better........a set of YUKON 4:56's for both diffs from Randy's
>ring and pinion.........I'll be ordering those soon!
>
>hehehe........I've got a well thought out plan here that I just need to
>execute it!
>
>Ron-
>01'Dakota Sport 3.9 4WD
>Street,Strip,and Show!
>
>
>----- Original Message -----
>From: "Michael Maskalans" <mike-lists@tepidcola.com>
>To: <dakota-truck@dakota-truck.net>
>Sent: Tuesday, October 21, 2003 10:06 AM
>Subject: Re: DML: Ron's Mopar Muscle Article
>
>
>>
>>
>> On Tuesday, October 21, 2003, at 12:40 AM, Gary Hedlin wrote:
>>
>> > *This message was transferred with a trial version of CommuniGate(tm)
>> > Pro*
>> >
>> > OK....I finally got off my dead a$$ and scanned the Mopar Muscle
>> > article
>> > that featured Ron's dyno pull at carlsile.
>> >
>> > The article is at http://www.scsilverdak.com/rons.pdf (the 2 pages that
>> > matter annyway)
>>
>> 290 HP out of a 3.9 ain't too shabby. well done!
>>
>> <g>
>> --
>> Michael Maskalans '98 Dakota SLT CC 4x4 318
>> details here: <http://mike.tepidcola.com/dak/>
>> mobile.612.618.4652 campus.585.274.2246 fax.954.697.0487
>>
>>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:04 EST